The following information below provides guidelines for setting up your own router.
You need to ensure that your router meets the following requirements:
WAN port - Minimum of 5Gbps, preferably a 10Gbps.
LAN ports - Should be sufficient to distribute Hyperfibre speeds to an internal network, preferably with a minimum of 2.5Gbps
Supports PPPoE or DHCP/IPoE.
VLAN tagging on WAN Interface.
Settings for HyperFibre using PPPoE
Connection Type / Encapsulation Protocol: PPPoE
Connection Type: Ethernet
PPP User Name: [username]@auth.icecold.nz
PPP Password:
VLAN Tagging (802.1Q): 10
VLAN Priority: (802.1P): 0 (Specify if mentioned)
MTU: 1492
MSS: 1452
Settings for HyperFibre using DHCP / IPoE
Connection Type / Encapsulation Protocol: DHCP
Connection Type: Ethernet
VLAN Tagging (802.1Q): 10
VLAN Priority: (802.1P): 0 (Specify if mentioned)
MTU: 1500
MSS: 1460
Created by Operations Team
Version 4.0
Last Updated 07/24
Copyright © Icecold Internet Services Ltd
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article