The following information below provides guidelines for setting up your own router.
You need to ensure that your router meets the following requirements:
WAN port - Minimum of 5Gbps, preferably a 10Gbps.
LAN ports - Should be sufficient to distribute Hyperfibre speeds to an internal network, preferably with a minimum of 2.5Gbps
Supports PPPoE or DHCP/IPoE.
VLAN tagging on WAN Interface.
Settings for HyperFibre using PPPoE
Connection Type / Encapsulation Protocol: PPPoE
Connection Type: Ethernet
PPP User Name: [username]@auth.icecold.nz
PPP Password:
VLAN Tagging (802.1Q): 10
VLAN Priority: (802.1P): 0 (Specify if mentioned)
MTU: 1492
MSS: 1452
Settings for HyperFibre using DHCP / IPoE
Connection Type / Encapsulation Protocol: DHCP
Connection Type: Ethernet
VLAN Tagging (802.1Q): 10
VLAN Priority: (802.1P): 0 (Specify if mentioned)
MTU: 1500
MSS: 1460
Updated by Platform Support Team
Version: 5.0
Division: Icecold Internet
Platform: Internet & Voice
Copyright © Icecold Internet Group Ltd